Still running inner tubes? It’s time to join the tubeless revolution.
Whether you’re riding trail, enduro, XC, or just out for weekend laps in the woods, switching to tubeless is one of the best upgrades you can make to your bike. More grip, fewer punctures, and better performance, all without breaking the bank.
Here’s why you should ditch the tubes and never look back:
Say Goodbye to Trail-Side Puncture Repairs
Picture this: you’re flying down your favourite descent when pfffft — puncture. You’re now sat on a rock, pulling your tyre off, searching for the hole, getting covered in sealant, while your mates ride off into the distance.
Not with tubeless.
Tubeless tyres, paired with a quality sealant like Peaty’s Tubeless Sealant, plug most punctures automatically as you ride. In most cases, you won’t even notice a hole — the residual sealant sloshing around inside your tyre plugs it instantly, often without losing any pressure.
Less faff. More riding.
Drop Weight Where It Matters Most
Want a free performance boost? Go tubeless and drop serious rotational weight from your wheels. Removing your inner tubes (plus switching to lightweight tubeless-ready tyres) reduces the energy it takes to pedal, accelerate, and corner.
Rotational mass is the most noticeable weight on your bike — cutting it makes your ride feel faster, snappier, and more responsive.
🚀 Quicker off the line
🛑 Later braking into corners
💨 Less fatigue on long climbs
Win-win-win.
No More Pinch Flats. Ever.
If you’ve ever cased a landing or hit a sharp rock only to hear the telltale hiss of a pinch flat, you’ll know the pain. Pinch flats happen when your inner tube gets squashed between your rim and tyre, splitting on both sides like a snake bite.
But with no inner tube, there’s nothing to pinch. Problem solved.
Better Grip, More Control
Running lower pressures with tubes is a recipe for flats. But with tubeless? You can go lower, ride harder, and enjoy the benefits.
Lower tyre pressures mean:
✅ More surface area contact with the trail
✅ Better traction when climbing or cornering
✅ Improved braking and control on rough terrain
And the best bit? No more bouncing around like you’re riding on beach balls. Your tyres conform to the trail, soaking up chatter and gripping like glue.
Make the Switch
Still unsure? Tubeless is easier to set up than ever. Pair your tyres with Peaty’s Tubeless Sealant, Mk2 Valves, and Holeshot Rim Tape, and you’re good to go. No more patch kits, no more trailside tantrums, just ride, seal, repeat.
👉 Check out our full tubeless setup range
👉 Ride harder. Grip better. Puncture less.
