Wash Degrease Lubricate (DRY) Starter Pack

LOAMFOAM BIODEGRADABLE BIKE CLEANER

1. Simply apply Peaty's LoamFoam liberally to dirty surfaces.
2. Wait for 3 - 5 minutes and blast off with clean water.
3. Stubborn dried-on dirt may need to be persuaded with a soft bristled brush.
4. Rinse off with cold water.

FOAMING DRIVETRAIN DEGREASER

1. Apply liberally to the cassette while cycling the chain backwards, building up a thick layer of foam
2. Apply directly to any other areas not already coated such as crank arms, derailleur bodies or jockey wheels
3. If you have a bike stand, run through all of your gears several times to agitate the grime
4. Agitate any stubborn areas where needed with a brush then leave to soak for two minutes
5. Rinse off thoroughly with clean water
6. Dry the chain using a clean cloth
7. Apply Peaty's LinkLube Dry

LINKLUBE DRY CHAIN LUBE

When applied for the first time, it is essential that LinkLube Dry is applied to a well degreased and dry drivetrain.
If a chain is dirty, then dirt and old lube take up space in the rollers, preventing new lube from reaching the places it needs to, and any residual oil-based lube can also result in reduced durability and premature blackening.

1. Fully degrease before applying fresh lube to ensure there is no old chain oil present. For best results use our Foaming Drivetrain Degreaser or, in the case of brand new chains, use XXX Solvent Degreaser to remove stubborn factory greases.
2. Ensure you thoroughly rinse your chain with clean water after degreasing (degreaser is designed to eat chain lube after all).
3. Allow chain to dry thoroughly before application.
4. Apply to the inside face of the chain only. The light blue color of the chain lube allows you to see exactly where you have and haven't applied.
5. Keep the chain cycling for 20 seconds to help the lube penetrate fully into the pins and rollers.
6. Check for over-application. You can tell if you over-apply LinkLube Dry because you’ll see the lube start to fill the narrow chain links. If this happens, just slowly cycle through your gears a few times to transfer the excess lube onto the cassette. You’ll see the lube disappear from the narrow links, leaving lube only where it’s needed on the chain.
7. Leave to fully dry so the lube goes from a light blue color to completely clear (you’re waiting for the water to evaporate, so leaving it in the sun helps). How long it takes for the water to evaporate—and for the lube to turn clear in color—depends on the weather conditions. This can range from just a few minutes (if hot) to a few hours (if cold and damp). For best results, apply the night before.
8. Ride!
   
   

CAUTION

Do not get LinkLube (or any lube for that matter!) on your brakes or brake pads.

DELIVERY

FREE shipping on all US orders over $60
$8.99 standard rate shipping with a typical transit times of 2-5 days, depending on location.
All orders are shipped via USPS.
Please expect delays to processing and delivery times around peak periods, such as Christmas, Thanksgiving, Black Friday, and promotion / sales periods.
Our warehouse team work as quickly as they can to pick and pack your orders, and you will be contacted if there's a longer than expected delay. Please get in touch if you have any queries regarding your order.

For full information, please visit our Delivery Information page.

RETURNS
If you are unhappy with your purchase, you have 30 days to return your items to us.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. Please ensure they are packaged appropriately to avoid damage during transit.
Please note, customers are accountable for return shipping charges. We suggest using a recorded or signed for delivery service to ensure the parcel is tracked and insured. All parcels are the customer’s responsibility until we receive them.

For further information, please visit our Refund Policy page.

FURTHER QUESTIONS?
Check out our FAQs for answers to common questions, or Contact Us for more.